The 'one-click quick disassembly' design of the distribution cabinet pull rod greatly improves the operation efficiency.

As the most important core equipment in electrical equipment, the distribution  cabinet pull rod is widely used. The distribution  cabinet pull rod is divided into indoor distribution cabinet and outdoor distribution cabinet. Through the outer support plate, sealing plate and second bottom plate of the quick-disassembly components, the staff can quickly remove the vacuum circuit breaker from the distribution cabinet with the help of quick-disassembly components, avoiding the distribution cabinet. After a fire, the vacuum circuit breaker continues to burn in the distribution cabinet, which is conducive to the repair of the circuit and the protection of other electrical equipment.

The outdoor distribution cabinet, including the cabinet body, is equipped with a base at the bottom of the cabinet, a partition is set in the middle of the cabinet, an isolation switch and a voltage transformer are installed on one side of the partition, a current transformer is installed on the other side, and a vacuum circuit is also installed on one side of the current transformer. Device, there is a support for supporting the vacuum circuit breaker under the current transformer; the support includes: the first base plate, the bottom of the vacuum circuit breaker is fixed on the top of the first base plate, and the inlet cable connector is connected to the inlet interface of the current transformer, and the vacuum circuit breaker and the wire cable Cables are connected to the couplings. The second bottom plate, one end of the second bottom plate is equipped with a sealing plate, and one wall of the sealing plate is equipped with an outer support plate; the side wall of the cabinet body has an opening corresponding to the sealing plate, and the outer wall edge of the sealing plate matches the inner wall of the opening, and the sealing plate can be inserted into the opening. Furthermore, the internal top of the cabinet is also equipped with a boom, a removable mounting plate is set on one side of the boom, and a connecting rod is set on the outer wall of the top of the mounting plate. The extension end of the connecting rod is fixedly connected to one wall of the sealing plate, and the movement of the sealing plate can drive the mounting plate to move synchronously.

About us?

Our industry involves plastic processing, zinc alloy die-casting, iron stamping, and other businesses. Our products have been sold well at home and abroad for more than 20 years! The total annual sales volume is 10 million pieces! A source production company - welcome foreign customers to visit, guide, and cooperate!Visit our website at https://www.yitailock.com/ to learn more about our products. For inquiries, you can reach us at [email protected].